Some of the backups fail satuting "The job was successfully completed, but some files may have been
busy or unaccessible. See the problems report or the client's logs for more details".
How to identify the busy files which are causing this error?
A few question on dedupe:
1) What is the client requirement to use client-side dedupe? e.g. can a client w/ 2GB RAM do client-side dedupe? Do I need to set anything on the Remote Agent on the client?
2) I ran the same full backup to dedupe storage job two times in a roll. It is a files backup job. The 1st job took 11 min and 2nd job took 18 min. Isn't that dedupe supposed to copy the changed block only? I would expect the 2nd job complete very quickly but it is not? Am I mis-understanding the concept here? (but differential job seems very quick sometimes)
3) Should I enable Advanced Open File for dedupe backup jobs? For File/SQL/Exchange? Will it affect performance?
I'm new to this dedupe thing and trying to understand more.
Thanks all.
Joseph.
what is the difference between the backup window and the application window, which we use for database backup schedule.
Mostly all oracle RMAN backups are configured with two scheduls backup and application.
Please share some information to undertsand the relationship between these two schedules.
Thanks in advance
I hope someone can help me with this...
I am trying to follow the Admin Guide for NB Exchange for v7.1 and have created the AD Account and have added it to the Domain Admins Group, I am trying to add the Account through the Delegation Wizard in System Manager for Exchange 2003 and I get all the way through to the end and get the following error:
"Failed to grant permission for AccountName on this object: dc=xxx/dc=xxx/dc=xxx/cn=Configuration."
I have researched the web and have found an article that relates to BackupExec that states that the Account used to run the Delegation Wizard and logged onto the Exchange Server needs to be an Admin...I am logged in using an account that is part of the Local Admin Group.
Any other thoughts would be appreciated...trying to configure GRT backups/restores with NB.
Thanks
i've not seen this error trying to do a restore before. Any ideas? Thanks!
Hello,
we have a Full (SDR) Backup of a Windows 2008 R2 Server (member server) on a USB HDD.
The Server is a HP DL 380P Gen8 with 2 * 6 Core CPU's.
When we try to make a SDR Restore to another Server (HP ML350 G6) we got an error when it is restoring the System State :
"A Failure occured creating a object"
The Hardware Logs:
* 2013-07-04T18:46:37.4180000Z Main Thread(116)
----------------------------------------------------------------------------------------------------
Starting Application Debug Log
* 2013-07-04T18:46:37.4650000Z Main Thread(116) Context: PROCESS : ERR
Cpu.cpp(242) Function: CPU::QueryCpuInfo
mSystemCPUs(4) should be a multiple of mLogicalProcessorsPerPackage(16)
* 2013-07-04T18:46:37.4810000Z Main Thread(116) Context: RETARGET : INFO
Retarget_Dll.cpp(429) Function: RetargetVolume
Inside function RetargetVolume.
* 2013-07-04T18:46:37.4960000Z Main Thread(116) Context: RETARGET : INFO
Retarget_Dll.cpp(444) Function: RetargetVolume
Unempty DDB and Target volume path.
* 2013-07-04T18:46:37.4960000Z Main Thread(116) Context: RETARGET : ERR
Retarget_Dll.cpp(486) Function: RetargetVolume
The system volume specified cannot be retargeted to run on this computer.
* 2013-07-04T18:46:37.4960000Z Main Thread(116) Context: BASE : INFO
SymbolEngine.cpp(549) Function: CSymbolEngine::GetDbgHelpAddress
The version of DBGHELP.DLL is 6.1.7600.16385.
* 2013-07-04T18:46:37.4960000Z Main Thread(116) Context: RESULT_CLASS : RESULT
Error RAO_ERROR_NOT_SUPPORTED (E7BC0001): The system volume specified cannot be retargeted to run on this computer.
(UMI:V-*-1980-1)
* 2013-07-04T18:46:37.5430000Z Main Thread(116) Context: RETARGET : INFO
Retarget_Dll.cpp(558) Function: RetargetVolume
Result code at the end of function RetargetVolume: -407109631
Any ideas ?
Ronny Henkes
I noticed trying to do a restore that about a week ago under 'first information store' it would show 'mailbox database'. now it doesn't show it at all. I don't get any information at all even though the backups say ok.
Hello,
We currently have two BE 3600 r2 appliances. Both are backing up all our servers.
For critical servers
Full backups weekly
then daily incremental
Rest
Full backup bi-weekly
then daily incremental
We also have a another location, which is connected with 20M connection vpn(our main site has 20M up, and secondary site has 25down)
I have been trying to figure out what the best way, I can backup our "backups" to that site. Because I can add network storage as destination on the BE appliance, I was thinking I can have a NAS device at the remote site, and that start backing up. But I have about 4.5 T of data in total.
I can backup all that locally first and then take the device to the remote location. But then because my local backup are essentially chaning every week, how can I modify my existing backup stragedy so I can have local backups along with remote backups.
Any suggestions on this would be greatly appreciated.
Thanks,
Gurpreet
We have two servers Main and Test. We backup Main but not Test and there is no Backup Exec agent on Test. The main system has Backup Exec 2010 R3 13.0 5024 and also an Exchange Agent., Main is the media server.
We are trying to restore an Exchange Public Folder on the Main machine, backed up from the Main system public folders, restoring it back to the Main system public folder (either to its original location or redirected) but the restore job always fails because there is no agent on the test machine. There is no replica of the public folders on the Test machine either (other than the Exchange System folders).
error is E0000F04 V-70-57344-3944
Why do we need an agent on the Test machine or how do we stop the restore trying to access it.
The system backups up the Main system with no errors and because there is no backup of the Test Machine an agent is not required. Main back is to Tape device and there were no issues duplicating the backup to disk so that we can do the restore.
Systems are running Windows 2008, Main has Exchange 2010 and Test has Exchange 2007.
I would to have two tapes backups running at the same time, this will cut the backup time in half. Can this device do this?
Symantec Backup exec 2010 r3
Hallo, meine BackupExec Lizenz wird anscheinend nicht richtig erkannt.
Nach der Eingabe zeigt das Programm nur eine Probeversion an und nicht die Vollversion, die ich doch erworben habe.
Kann mir jemand bitte damit helfen?
M
Hi all,
This is might be a repeat questions.
I just bought a 3TB USB drive to replace our old 500GB USB drive to store all of the recovery points on System Recovery.
For some reason I'm not able to see the 3 TB drive on the System Recovery so I can use it as my destination.
We are using Small Business Server 2008 and not the R2 version if there's such a thing.
Does 3TB drive not supported?
Anyone has the workaround in regards to this?
Do I need to upgrade to SRS 2013?
Do I need to downgrade to 2 TB drive?
Any tips would be appreciated.
Thanks.
Cp
Hello,
Hi All ,
This is regarding the Data domain issue most of the backup admin l facing with Netbackup .
DDBOOST is enabled on datadomain and hope the below link will give overall idea on Data domain with netbackup
http://www.emc.com/collateral/software/white-papers/h7296-data-domain-boost-openstorage-wp.pdf
cheer,
Rajesh Kumar
Based on what I'm seeing, the NDMP back up streams are not being DeDuplicated or the deduplication ratio is non existent.
My questions is: If I have NDMP disabled on the NetApp filers and back up the volumes via CIFS shares, will I be able to DeDuplicate the data in this manner?
-Kevin
Backup job for the media server fails with the 52 error code, But the same media server successfully completes the backup for other clients.
It fails for self with either 52 or 40 error code.
Hi
I am having an issue whereby snapshot processing is taking roughly 1 hours before the backup job will actually start writing data to the destination. In this particular case the desitination is a tape and the backup source is the backup server(media server) itself.
I have a physical backup server that has Backup Exec 2010 R3 installed. This server is attached to two storage systems via FC, a DS3524 and a DS4700.
The DS3524 contains VMs and the DS4700 contains a few VMs (DEV) and is the location of the LUN presented to the backup server that is mounted as an NTFS volume. This NTFS volume contains data I need to backup to tape.
All LUNS (except fot the LUN mounted on the backup server) appear as non-initialized in Disk Management, this is because I have set the policy on the backup server to not automount devices as the other LUNS contain VMFS datastores. There are roughly 30 LUNS.
When I attempt to backup the backup server itself during the snapshot processing stage the event viewer is throwing the following warning for all LUNS that are non-initialized:
ASR Warning: Failed to collect disk information for ASR Backup. Reason: Unable to obtain disk information for device xx
The process of VSS attempting to gather info for each of the 30 LUNS is taking roughly 1 hour.
I understand why VSS cannot gather this information (LUNS offline) but why is backup exec (or the VSS service) trying to gather information about devices that are not even part of the backup job? And is there a way around this?
Cheers
David
Hi,
I use NBU 7.x
I want to delete files and folders after the file system backup completed successfully.
Is there any feature for this? or I need to create post script?
Any example script for this?
Thanks,
IAW
Hello All,
i have windows 2008R2 installed Syamentec Backup Exec 2012 with fully patches, i have created some backup jobs of some server always backup jobs status changing to superceded or Queued, i am really fed-up with this even i am unable to delete the backup or server it is just hanging, this new version of the Syamtec i think came with full of bugs. please any one can help.
thanks.